Fandom

Units Wiki

Volume

311pages on
this wiki
Add New Page
Talk0 Share
Wikipedia.png This page uses content from the English Wikipedia. The original article was at Volume. The list of authors can be seen in the page history. As with the Units of Measurement Wiki, the text of Wikipedia is available under Creative Commons License see Wikia:Licensing.


Simple Measuring Cup

A measuring cup can be used to measure volumes of liquids. This cup measures volume in units of cups, fluid ounces, and milliliters.

Volume is the quantity of three-dimensional space enclosed by some closed boundary, for example, the space that a substance (solid, liquid, gas, or plasma) or shape occupies or contains.[1] Volume is often quantified numerically using the SI derived unit, the cubic meter. The volume of a container is generally understood to be the capacity of the container, i. e. the amount of fluid (gas or liquid) that the container could hold, rather than the amount of space the container itself displaces.

Three dimensional mathematical shapes are also assigned volumes. Volumes of some simple shapes, such as regular, straight-edged, and circular shapes can be easily calculated using arithmetic formulas. The volumes of more complicated shapes can be calculated by integral calculus if a formula exists for the shape's boundary. One-dimensional figures (such as lines) and two-dimensional shapes (such as squares) are assigned zero volume in the three-dimensional space.

The volume of a solid (whether regularly or irregularly shaped) can be determined by fluid displacement. Displacement of liquid can also be used to determine the volume of a gas. The combined volume of two substances is usually greater than the volume of one of the substances. However, sometimes one substance dissolves in the other and the combined volume is not additive.[2]

In differential geometry, volume is expressed by means of the volume form, and is an important global Riemannian invariant. In thermodynamics, volume is a fundamental parameter, and is a conjugate variable to pressure.

UnitsEdit

File:Volume measurements from The New Student's Reference Work.svg

Any unit of length gives a corresponding unit of volume, namely the volume of a cube whose side has the given length. For example, a cubic centimeter (cm3) would be the volume of a cube whose sides are one centimeter (1 cm) in length.

In the International System of Units (SI), the standard unit of volume is the cubic meter (m3). The metric system also includes the liter (L) as a unit of volume, where one liter is the volume of a 10-centimeter cube. Thus

1 liter = (10 cm)3 = 1000 cubic centimeters = 0.001 cubic meters,

so

1 cubic meter = 1000 liters.

Small amounts of liquid are often measured in milliliters, where

1 milliliter = 0.001 liters = 1 cubic centimeter.

Various other traditional units of volume are also in use, including the cubic inch, the cubic foot, the cubic mile, the teaspoon, the tablespoon, the fluid ounce, the fluid dram, the gill, the pint, the quart, the gallon, the minim, the barrel, the cord, the peck, the bushel, and the hogshead.

Related terms Edit

Volume and capacity are sometimes distinguished, with capacity being used for how much a container can hold (with contents measured commonly in liters or its derived units), and volume being how much space an object displaces (commonly measured in cubic meters or its derived units).

Volume and capacity are also distinguished in capacity management, where capacity is defined as volume over a specified time period. However in this context the term volume may be more loosely interpreted to mean quantity.

The density of an object is defined as mass per unit volume. The inverse of density is specific volume which is defined as volume divided by mass. Specific volume is a concept important in thermodynamics where the volume of a working fluid is often an important parameter of a system being studied.

The volumetric flow rate in fluid dynamics is the volume of fluid which passes through a given surface per unit time (for example cubic meters per second [m3 s-1]).

Volume formulas Edit

Shape Volume formula Variables
Cube a^3\; a = length of any side (or edge)
Cylinder \pi r^2 h\; r = radius of circular face, h = height
Prism B \cdot h B = area of the base, h = height
Rectangular prism l \cdot w \cdot h l = length, w = width, h = height
Sphere \frac{4}{3} \pi r^3 r = radius of sphere
which is the integral of the surface area of a sphere
Ellipsoid \frac{4}{3} \pi abc a, b, c = semi-axes of ellipsoid
Pyramid \frac{1}{3}Bh B = area of the base, h = height of pyramid
Cone \frac{1}{3} \pi r^2 h r = radius of circle at base, h = distance from base to tip
Tetrahedron[4] {\sqrt{2}\over12}a^3 \, edge length a
Parallelepiped 
a b c  \sqrt{K}



\begin{align}
 K =& 1+2\cos(\alpha)\cos(\beta)\cos(\gamma) \\
 & - \cos^2(\alpha)-\cos^2(\beta)-\cos^2(\gamma)
\end{align}

a, b, and c are the parallelepiped edge lengths, and α, β, and γ are the internal angles between the edges
Any volumetric sweep
(calculus required)
\int_a^b A(h) \,\mathrm{d}h h = any dimension of the figure,
A(h) = area of the cross-sections perpendicular to h described as a function of the position along h. a and b are the limits of integration for the volumetric sweep.
(This will work for any figure if its cross-sectional area can be determined from h).
Any rotated figure (washer method)
(calculus required)
\pi \int_a^b \left({\left[R_O(x)\right]}^2 - {\left[R_I(x)\right]}^2\right) \mathrm{d}x R_O and R_I are functions expressing the outer and inner radii of the function, respectively.
Klein bottle 0\; No volume—it has no inside.

Ratio of volumes of a cone, sphere and cylinder of the same radius and heightEdit

File:Inscribed cone sphere cylinder.svg

The above formulas can be used to show that the volumes of a cone, sphere and cylinder of the same radius and height are in the ratio 1 : 2 : 3, as follows.

Let the radius be r and the height be h (which is 2r for the sphere), then the volume of cone is

\tfrac{1}{3} \pi r^2 h = \tfrac{1}{3} \pi r^2 (2r) = (\tfrac{2}{3} \pi r^3) \times 1,

the volume of the sphere is

\tfrac{4}{3} \pi r^3 = (\tfrac{2}{3} \pi r^3) \times 2,

while the volume of the cylinder is

\pi r^2 h = \pi r^2 (2r) = (\tfrac{2}{3} \pi r^3) \times 3.

The discovery of the 2 : 3 ratio of the volumes of the sphere and cylinder is credited to Archimedes.[5]

Volume formula derivations Edit

Sphere Edit

The volume of a sphere is the integral of infinitesimal circular slabs of thickness dx. The calculation for the volume of a sphere with center 0 and radius r is as follows.

The surface area of the circular slab is \pi r^2 .

The radius of the circular slabs, defined such that the x-axis cuts perpendicularly through them, is;

y = \sqrt{r^2-x^2}

or

z = \sqrt{r^2-x^2}

where y or z can be taken to represent the radius of a slab at a particular x value.

Using y as the slab radius, the volume of the sphere can be calculated as  \int_{-r}^r \pi y^2 \,dx = \int_{-r}^r \pi(r^2 - x^2) \,dx.

Now \int_{-r}^r \pi r^2\,dx - \int_{-r}^r \pi x^2\,dx = \pi (r^3 + r^3) - \frac{\pi}{3}(r^3 + r^3) =  2\pi r^3 - \frac{2\pi r^3}{3}.

Combining yields gives V = \frac{4}{3}\pi r^3.

This formula can be derived more quickly using the formula for the sphere's surface area, which is 4\pi r^2. The volume of the sphere consists of layers of infinitesimal spherical slabs, and the sphere volume is equal to

 \int_0^r 4\pi u^2 \,du =   \frac{4}{3}\pi r^3.

Cone Edit

The cone is a type of pyramidal shape. The fundamental equation for pyramids, one-third times base times altitude, applies cones as well. But for an explanation using calculus:

The volume of a cone is the integral of infinitesimal circular slabs of thickness dx. The calculation for the volume of a cone of height h, whose base is centered at (0,0,0) with radius r, is as follows.

The radius of each circular slab is r if x = 0 and 0 if x = h, and varying linearly in between—that is, r\frac{(h-x)}{h}.

The surface area of the circular slab is then  \pi \left(r\frac{(h-x)}{h}\right)^2 =  \pi r^2\frac{(h-x)^2}{h^2}.

The volume of the cone can then be calculated as  \int_{0}^h \pi r^2\frac{(h-x)^2}{h^2} dx,

and after extraction of the constants: \frac{\pi r^2}{h^2} \int_{0}^h (h-x)^2 dx

Integrating gives us \frac{\pi r^2}{h^2}\left(\frac{h^3}{3}\right) = \frac{1}{3}\pi r^2 h.

See also Edit

ReferencesEdit

  1. "Your Dictionary entry for "volume"". http://www.yourdictionary.com/volume. Retrieved 2010-05-01. 
  2. One liter of sugar (about 970 grams) can dissolve in 0.6 liters of hot water, producing a total volume of less than one liter. "Solubility". http://chemed.chem.purdue.edu/genchem/topicreview/bp/ch18/soluble.php. Retrieved 2010-05-01. "Up to 1800 grams of sucrose can dissolve in a liter of water." 
  3. "General Tables of Units of Measurement". NIST Weights and Measures Division. http://ts.nist.gov/WeightsAndMeasures/Publications/appxc.cfm#4e. Retrieved 2011-01-12. 
  4. Coxeter, H. S. M.: Regular Polytopes (Methuen and Co., 1948). Table I(i).
  5. Rorres, Chris. "Tomb of Archimedes: Sources". Courant Institute of Mathematical Sciences. http://www.math.nyu.edu/crorres/Archimedes/Tomb/Cicero.html. Retrieved 2007-01-02. 

External linksEdit

Template:Wikibooks Template:Wikibooks

Category:Fundamental physics concepts *

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.